A Review for the Thermophysics and the Yarkovsky and YORP Effects of Asteroidstwo     

Jiang Hao-xuan  Ji Jiang-hui 《Chinese Astronomy and Astrophysics》2019,43(1):1-22

The thermophysics of asteroids has become an important frontier for the research of asteroids in recent years. In this paper, we have introduced the thermophysical models commonly used in this field, by using these thermophysical models and combining with the data observed by the space or ground-based IR telescopes, some thermophysical parameters of asteroids, such as the thermal inertia, geometric albedo, effective diameter, surface roughness, and surface temperature, etc., can be derived. We have mentioned also the shape model and IR observation of asteroids, as well as the obtained thermophysical parameters for a part of asteroids. These thermophysical parameters can be further applied to studying the asteroids’ Yarkovsky effect, YORP effect, and so on, even can provide the relevant information for the spacecraft landing on the asteroid surface and the return mission of a spacecraft after the asteroid sampling.  相似文献   

Study on deepwater conductor jet excavation mechanism in cohesive soil     

《Applied Ocean Research》2019

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

西昆仑玛尔坎苏石炭纪大型锰矿带构造背景与成矿条件     

张连昌  张帮禄  董志国  谢月桥  李文君  彭自栋  朱明田  王长乐 《吉林大学学报(地球科学版)》2020,50(5):1340-1357

西昆仑北段玛尔坎苏地区探明的大型碳酸锰成矿带，是我国近年最重要的找矿成果之一。该锰矿带构造上属北昆仑晚古生代弧后伸展盆地，其构造动力学背景为古特提斯洋向北俯冲于塔里木地块之下形成的弧盆体系。锰矿体主要发育于晚石炭世喀拉阿特河组含炭泥质灰岩夹薄层灰岩中。矿石中主要金属矿物为菱锰矿（75%~95%），次为软锰矿、硫锰矿及少量黄铁矿等。含锰岩系岩性和岩相学研究表明，玛尔坎苏锰矿带属典型的海相沉积锰矿床，其矿床成因可能与晚古生代半局限盆地沉积和海底热液活动有关。海底热液活动可能为成矿提供了丰富的物质来源。含锰岩系元素和同位素地球化学特征表明，玛尔坎苏锰矿沉淀时的水体环境为常氧条件，而矿层下盘（部分）岩系的岩性及地球化学特征反映其沉积时的水体环境为低氧—贫氧条件。玛尔坎苏锰矿带锰矿石具有负的δ¹³C值（-23.3‰~-10.0‰），推测有机质导致的还原作用是该锰矿由原生氧化锰在成岩期转化为菱锰矿和形成富锰矿的重要机制。  相似文献   

一种基于M估计的Robust-ELM滑坡位移预测方法     

高彩云  高宁 《大地测量与地球动力学》2019,39(2):153-157

采用传统ELM算法进行滑坡位移预测时，其网络输出权值由最小二乘估计得出，导致ELM抗差能力较差，从而造成网络训练参数不准确。为此，将M估计与ELM相结合，提出一种基于M估计的Robust-ELM滑坡变形预测方法。该方法利用加权最小二乘方法来取代最小二乘法计算ELM输出权值，以减少滑坡监测数据中粗差对ELM预测的干扰。分别以链子崖、古树屋滑坡体为例，将Robust-ELM进行了单维、多维粗差的抵御性验证。结果表明，该方法能够有效降低粗差对预测的影响，具有良好的抗差能力。  相似文献   

A comparison of methods to estimate groundwater recharge from bare soil based on data observed by a large-scale lysimeter     

Zaiyong Zhang  Wenke Wang  Chengcheng Gong  Ming Zhang 《水文研究》2020,34(13):2987-2999

Effectively estimating groundwater recharge is critical to manage water resources, especially in arid and semi-arid regions as impacted by intensive human activities and climate changes. Rare insights have been gained into groundwater recharge since direct observation is hard to carry out. Although several methods are currently available to estimate groundwater recharge, the estimated results may cover noticeable bias. The behaviours of different methods based on different conceptual frameworks and exhibiting different levels of complexity should be examined to estimate actual groundwater recharge. This study aims to assess the performance of four common methods to estimate groundwater recharge. For this end, large-scale lysimeters equipped with soil water content sensors and water table sensors were set up at a research site established in Guanzhong Basin of China. The data achieved by 1-year observation were employed to compare four estimation methods. As revealed from the results, the following findings are drawn. (a) Groundwater level fluctuation (GLF) method is simple, whereas its accuracy is determined by specific yield, and adopting a water balance method to estimate specific yield can considerably enhance the accuracy of GLF. (b) The calibrated numerical model can obtain the optimal result compared with the other methods, whereas long-term observation data are required for parameter calibration. (c) In the water balance method, the maximum entropy production (MEP) model and a practical method (estimating evaporation between two rainfall events) were used to calculate evaporation. As indicated by the results, water balance method combined with MEP is capable of obtaining more reliable results of groundwater recharge compared with the practical method. (d) With an analytical model based on linearized Richards' equation, accurate results can be achieved. What is more, the analytical model only needs the measurement of soil moisture near the surface. The limitation of this method is that it is difficult to determine the maximal water flux. The mentioned findings are of critical implications to the management and sustainable development of groundwater.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

Quantifying suitable dynamic water levels in marsh wetlands based on hydrodynamic modelling     

Peng Hu  Zefan Yang  Qiande Zhu  Weize Wang  Qin Yang 《水文研究》2021,35(2):e14054

The water level of marsh wetlands is a dominant force controlling the wetland ecosystem function, especially for aquatic habitat. For different species, water level requirements vary in time and space, and therefore ensuring suitable water levels in different periods is crucial for the maintenance of biodiversity in marsh wetlands. Based on hydrodynamic modelling and habitat suitability assessment, we determined suitable dynamic water levels considering aquatic habitat service at different periods in marsh wetlands. The two-dimensional hydrodynamic model was used to simulate the temporal and spatial variation of water level. The habitat suitability for target species at various water levels was evaluated to obtain the fitting curves between Weighted Usable Area (WUA) and water levels. And then suitable water levels throughout the year were proposed according to the fitting curves. Using the Zhalong Wetland (located in northeastern China) as a case study, we confirmed that the proposed MIKE 21 model can successfully be used to simulate the water level process in the wetland. Suitable water levels were identified as being from 143.9–144.2 m for April to May, 144.1–144.3 m for June to September, and 144.3–144.4 m for October to November (before the freezing season). Furthermore, proposed water diversion schemes have been identified which can effectively sustain the proposed dynamic water levels. This study is expected to provide appropriate guidance for the determination of environmental flows and water management strategies in marsh wetlands.  相似文献   

加权总体最小二乘的效率优化算法     

倪福泽  王建民 《测绘通报》2020,(11):90

加权总体最小二乘法是理论上估计EIV模型参数相对严密的方法，其迭代过程中涉及的矩阵运算较为耗时，在处理大量级数据时尤其明显。PEIV模型有助于提高加权总体最小二乘法的计算效率。本文基于PEIV模型和经典最小二乘准则给出了一种加权总体最小二乘法算法，算法的推导过程简洁，易于理解，迭代过程中无需重构矩阵，减少了矩阵运算量。最后通过仿真试验验证了算法的可靠性。试验结果表明，本文算法可以取得与现有算法相同的参数估计精度且计算效率更高。  相似文献